Ultra Guard
- Regular price
- $32.00
- Regular price
-
- Sale price
- $32.00
- Unit price
- per
Description
Description
Ultra Guard Waterbased Polyurethane is a water-based polyurethane-acrylic protective varnish reinforced with silica. It protects surfaces by increasing durability and resistance to abrasion. This varnish is odourless, non-yellowing, easy to use and has excellent coverage. Available in two finishes: Flat & Satin.
HOW TO USE:
It can be applied on interior water-based paints and all types of bare wood. It is suitable for furniture, worktables, wood floors and other interior surfaces. Its whitish colour will become transparent when drying and will enhance the colour of the surface (wet effect). Can be used on both light and dark colours.
For painted surfaces, clean and degrease using TSP Alternative. If freshly painted wait 24-48 hrs before applying Ultra Guard Waterbased Polyurethane.
For bare wood, sand smooth with 120 grit.
Prior to application all surfaces should be free of wax, varnish or other types of contaminants. Always remove dust after sanding prior to application.
APPLICATION:
Mix thoroughly with a stick. Wait 20 minutes before applying.
Apply with a synthetic bristle brush or a microfiber roller. Sand lightly with 220 grit between coats.
NUMBER OF COATS:
2 on paint.
3 on bare wood and non-sealing stain.
DRYING TIME:
Between coats: 3 to 48 hrs (after 48 hrs, a light sanding with 220 grit is necessary before applying another coat).
On bare wood only, apply second coat after 3 hours without sanding.
Before Sanding: wait 6 to 8 hours.
Careful use: 24 hours.
Complete curing: 7 to 10 days.
Size: 473 mL
Base: water-based polyurethane
Coverage: 6m2 — 65ft2 per can
Finish: flat
Clean up: water
Dry time: 6-24 hours
Re-coat time: 3-48 hours*
Cure time: 7-10 days
Durability: high
Application Tool | Brush or Staalmeester roller |
Location | Interior |
Re-coat Time | 3-48 hours* |
Top Coat | No additional top coat is required.- this is made strong enough for floors and table tops |
Clean Up | Odourless Solvent - can also be used to thin the coats and create a faster drying/cure time. |
Coverage | 6m2 — 65ft2 per can |
Finish/Sheen | Flat or Satin |
Recommended Uses | Virtually any surface with minimal prep required |
Can Be Applied To | It can be applied on interior water-based paints and all types of bare wood. It is suitable for furniture, worktables, wood floors and other interior surfaces. |
Can Be Painted Over | After 10 days curing, with a clean and scuff sand. Test first to ensure adhesion prior to tackling your full project. |
How to Prep | Prior to application all surfaces should be free of wax, varnish or other types of contaminants. Always remove dust after sanding prior to application. |
Cure Time | 7-10 Days |
Maintenance/ Cleaning | Gentle cleaners ( mild soap / warm water ) |
*After 48 hours, a light sanding with 220 grit is necessary before applying another coat.